Yeah, that record may stand for quite some time.
Yeah, that record may stand for quite some time.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Haha tried that last time... only got half the amount! I'll def keep you all updated with the progression to my progress haha currently uni is taking a huge chunk of my time up gah hopefully Thursday night I should have the vid up of the unboxing and Friday I'll start sanding I've ordered my stains from the US. Got a real nice purple and a black. Going to use drops of the black to make the purple darker where needed. Can't wait to actually start the build!
Completed builds: GR-1SF - came up a treat!
Video is finally done! So stoked with my kit. Can't wait to start. Hopefully will get some sanding done tomorrow
here's the vid! https://youtu.be/Q0wWBjYWM4w
Completed builds: GR-1SF - came up a treat!
For some reason I have no sound but kind of PU are those? And good luck with the build
Nr 1: Red Widow LP-1MQ (Finished) ->Diary<-
Ok, I asked it because they look different than the PU's that came with my black hardware kit. Mine are just filled with some black epoxy or something and yours are 'open' at the back. Perhaps there's other hardware with the SG kits....
Nr 1: Red Widow LP-1MQ (Finished) ->Diary<-
So, I fixed the heel of the neck to fit the pickup. I only removed material from the edge not any actual length so the scale is unaffected was a sporadic decision so no filming of that' was only chiselling anyway haha!
My push/pull pots came today! Getting excited to get into it!
Completed builds: GR-1SF - came up a treat!
Hey Shazz, better check the scale length, from memory I had to chop a bit of the neck heel - maybe it's not a problem anymore on current kits, that was years ago.
Best get the centre pup cavity routed early in the build !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in