Check out my 2nd video!!
https://youtu.be/S-uZ9qqLf6w
Check out my 2nd video!!
https://youtu.be/S-uZ9qqLf6w
Completed builds: GR-1SF - came up a treat!
Hi Shazz, bummer about the router biting more than it should have but as you said, the PUP's and mounting rings fully cover the new swimming pool. Good save & recovery.
Cheers, Waz
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
The video editor would have been working overtime to remove all the offensive language if it happened to me. You did well to remain fairly well composed for such an oops moment.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Yeah, routing is always that little bit nerve shredding. I've spent hours making specific templates to have the guide bearing shift or the bit dig in where it wasn't supposed to. Dammed frustrating. Great work and it's probably better you broke out those walls now, rather than later on when you had paint or finish on as well.
Sent from my iPhone using Tapatalk
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Hearing protection Shazz! Hearing protection!
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Hey Shaz, glad the pup surrounds cover the swimming pool. The templates aren't really suitable for the job, if you line it up in the wrong position. You are better getting templates made up of the actual pup shape, that way you can line it up perfectly with marked outline where the cavity will be. Using a pattern following router bit of course.
Also get into the habit of waiting for the router bit to stop before you remove it from the workpiece. If you angle it slightly while the bit is spinning it can easily cut into wood that you don't want to be damaged/cut.
Also as Fretty says you should wear ear muffs.
Treat routers with the upmost respect.
EDIT also if the router base plate isn't a perfect circle which it probably isn't then when you angle the router slightly away from square that's probably why the cavity walls got torn out
Last edited by wokkaboy; 28-06-2017 at 12:43 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Agree with everything Wokka says here. Need to add one thing though, don't try to cut at full depth in one pass. Many shallow passes will produce a much neater outcome. Also, if you are removing bulk material, drilling out with a spade or forstner bit is a good way to prep. That way the router doesn't have to work as hard and you put less stress on the surrounding material.
Loving the vids so far.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'