Hi DB,
Just having an idea for my next build...I'm wanting a semi hollow body and I like the look of the ES-2V but I don't like the wooden bridge. So...
My idea is to replace it with a standard LP bridge and saddle set up.
Do you think this is possible? Are there any hidden problems like veneer lifting, brace interference, etc.
Thanks mate
Hey ILR guitars, I would find a build diary from this model and ask them to see how big the support block is under the bridge. If its wide enough for a TOM bridge you may be ok. I very much doubt the block will be big enough for a bridge and tailpiece setup so you may have to look at a wrap around TOM bridge.
I think Dedman has almost finished a ES-2V build
EDIT I just had a look at the kit photos and it already has the tailpiece bush holes drilled. All you need to know is how wide the block is under the bridge area
Last edited by wokkaboy; 16-03-2017 at 01:16 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
The only conceivable problem I can see is with the block under the saddle location.
As long as it is big enough to handle the posts it will work.
Sorry I cant give a more detailed answer as I don't have one here to have a look at.
Perhaps one of the forum peeps that has built one can have a look and give us an answer?
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Woks. Snap!
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Genius Wokka. Gav Turner also did a great kit too. Questions have been sent away...will keep you guys informed
no worries ILR, I was going to mention Gav T but it may be binned after his electrical soot problem in his man cave
Last edited by wokkaboy; 16-03-2017 at 01:51 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
from what I can see the centre block goes right through, but of course ...my inspection mirror has slipped into that void of things you need but aren't there.
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
haha good on you for looking Dedman. Always happens when you need a tool it has gone missing down the man cave black hole !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Well, we might be in luck boys. Thanks Dedman for the info. Gav's diary build has alot of good info there too.
http://guitarkitbuilder.blogspot.com...l%20Florentine
You're a legend Gav. Keep going mate!!
so what is your verdict IRL, are you going to order one ? I think chances are pretty high the centre block should be a constant width to the back of the bridge pup cavity
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote
