Page 3 of 3 FirstFirst 1 2 3
Results 21 to 26 of 26

Thread: Fretless Fingerboard Finish...

  1. #21
    GAStronomist FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    5,666
    Quote Originally Posted by wokkaboy View Post
    definitely Frankie, I was a bit concerned about looking through Millers beer goggles.
    To be fair to Miller, its not the worst beer I've ever tasted, but its certainly no where near the best. From a purely personal point of view of course, to each their own at the end of the day.
    FrankenLab
    Hand crafting guitars, because Death Rays are expensive.


  2. #22
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,631
    Quote Originally Posted by andrewdosborne View Post
    I also use eye goggles when using copious amounts of CA glue - the fumes play havoc with my eyes (stinging/watering....)
    Same reaction with me too.

    Don't care too much for any US based scientific safety data as it is mostly BS paid for and provided by the manufacturers not independent sources, as is the case with many products we are led to believe are safe to use.

    Inhaling might not kill you initially, well, not in one isolated session but over exposure will take it's toll just like with all chemicals. Remember how not too long ago we were told DDT and much other chemical nasty stuff was safe? Currently banned in most western countries but probably still being used in developing ones instead. Big business has too much money tied up in these things to simply roll over and bow to environmentalist or government pressure. Same thing was said about Asbestos too and look where we are today.

    Best to be sensible and take precautions rather than unnecessary risks.
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

  3. #23
    Member Hobastard's Avatar
    Join Date
    Jan 2017
    Location
    Hobart Tasmania
    Posts
    436
    CA certainly gives off some nasty vapours, been caught out once, and I was only glueing a small job but that was enough. Now use in a well ventilated space and I reckon eye protection and a P2 mask for sure. Got plenty at work.....

  4. #24
    GAStronomist Simon Barden's Avatar
    Join Date
    Oct 2016
    Location
    Reading, UK
    Posts
    10,547
    I've never suffered any reaction to CA vapours. Maybe we get a slightly different formulation? Wouldn't think so but you never know.

  5. #25
    Member Hobastard's Avatar
    Join Date
    Jan 2017
    Location
    Hobart Tasmania
    Posts
    436
    Didn't have a reaction, but the brief burning sensation up the nose is enough of a warning shot. I work in Emergency Response on a large industrial site, and I would look a bit silly if I was brought down by something like this.....
    Remember, "a truely wise man does not play leapfrog with a unicorn".

  6. Liked by: wazkelly

  7. #26
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,631
    Having a Cert IV in OH & S has not stopped me taking calculated risks at home whilst nobody is watching or recording what is going on and I rarely suit up in all the protective gear. Rubber gloves, yes as a minimum when handling stains & finish, wear glasses most of the time but often take them off for close up work and it was the vapours coming off CA glue that affected me with or without glasses on through initially mild watering, then stinging, all in a well ventilated area. Obviously some people may react differently to another when exposed to chemicals and this little container of stuff comes with the following printed on the label "Warning: Eye and respiratory irritant. Bonds to skin in seconds." It was this stuff that I used.....
    Click image for larger version. 

Name:	hs-4red.jpg 
Views:	139 
Size:	15.6 KB 
ID:	17856Click image for larger version. 

Name:	photo 1.jpg 
Views:	143 
Size:	273.5 KB 
ID:	17857
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

  8. Liked by: Hobastard

Page 3 of 3 FirstFirst 1 2 3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •