Final coat blisters

[Andy40]

I tried it once. didn't work very well for me and ended up sanding it off.

DB says there should be no problem though just the neck finish dries a bit harder.

Those scratches should come out if you polish with micromesh pads, cut and polish then maguires Scratch X

[Adam Barnes]

Thanks andy

[cade711]

Hi Adam. I've just finished a kit using dingotone which I applied starting late December and pretty much carried the process throught out summer in QLD. It's been sitting around 30 degrees average for a lot of that time which made the DT remain tacky but I just ensured a minimum of at least 7 days between every coat. Did 3 stain coats, 3 intensifier and 3 finish coats with about 15 days drying after final coat. As the guys said I changed from steelwool to wet/dry (except for a super light rub prior to waxing the body). I did get the 'blister' 'orange skin' effect in the process but the end result was smooth and worth the effort.

[cade711]

Took about 10 weeks of staining all up

[DJP]

I'm having great results using the neck finishing coats on the body - but I'm in Perth and have had some nice windows of low humidity. I have also tried to leave 5 days between this coats and avoided applying when humidity greater than 50%. I do find it hard to be patient and wait though -I'm currently in that 21 day window before final cut and polish.