Well the standard line is "Try the Veal" but that's not PC these days...
Well the standard line is "Try the Veal" but that's not PC these days...
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Never heard of that expression before? Probably best not try and explain on a PG rated forum I suppose.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
so we have made a little progress, a weekend spent making routing templates, figuring stuff out, stuffing stuff up and making the best of it.
edit: can someone tell me how to delete the attached image? I didn't want that one there.
edit@: Thanks WazKelly, i couldn't figure it out and it was making me nuts.
Last edited by FrankenWashie; 31-05-2017 at 09:10 PM.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
When you click 'Edit' it shows which images are attached and from there you can delete if required.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
a very interesting build look forward to see him finished
Looking good to me. What's the plan for the Strat pickup mounting? Fix a metal or plastic plate in the cavity with a couple of mounting holes drilled in it?
Frankenlab seems to be working well FW. nice job so far
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Spot on Simon. I am going to prep two plate versions in different materials, 3mm brass plate and 3mm 6AL4V Titanium, the plate will mount both PUPS and secure to that middle section with flush mount screws.
I thought the brass would provide some good resonance and the Titanium is to hold down the weight if the brass is too heavy. ( and cause I though it would just be cool!)
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
With a 3mm thick plate of either brass or titanium in that relatively small size of cavity, I doubt you'd get much resonance from either, especially if firmly screwed against the wood which will damp it. But it will be a nice firm fixing for the pups.