Hi Everyone, long time no post from me, been away with work, Christmas etc. Doen a few gigs with my new RCA4 - absolutely chuffed to bits, sounds great, just got a new TC Electronics amp as well which is fantastic. Anyway, got a bit of a problem - the neck (glued) seems to be coming loose. There a bit of a gap on the back, plus you can see the bare wood a bit on the front where the neck sits in the body see pictures attached.Has anyone had this happen before, and what do I do about it. Does the neck need to come out and be re glued, or do I need to put a plate on the back and screw through to the neck to hold it in ?
Any help would be very much appreciated. Thanks Alan.