ah yeah of course need 6 screws/springs for your Wilko bridge but may only need longer screws for E A D saddles. Sure it will be fine to intonate as you moved the bridge forward a good 6-8mm by the looks
ah yeah of course need 6 screws/springs for your Wilko bridge but may only need longer screws for E A D saddles. Sure it will be fine to intonate as you moved the bridge forward a good 6-8mm by the looks
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yep about 6mm forward
Hooray for good weather! Looking good.
Thanks Simon I am happy with the way it is coming alongOriginally Posted by Simon Barden
Didn't last long, started to spit as I was packing up then the sun came out hot and bright so a couple of loads of washing went on the line, 15 minutes later we had a massive storm.
Very weird weather this year
Last edited by dave.king1; 23-03-2017 at 04:50 AM.
Just fitted the Tonerider to the bridge and sat it in position, buggeration still need to excavate a little more from the front lower side of the cavity to get it to sit in place.
May yet get the 1st coat of CG on the quit this weekend if the weather holds
Nice progress Dave, did you manage to get any CG on today? The humidity dropped briefly to 70% but quickly shot back up to 95%..... sure is a bad season for any type of finishing...
Sent from my SM-T700 using Tapatalk
Last edited by andrewdosborne; 25-03-2017 at 04:55 PM.
Current Projects
#Planning 5 String Bass
Nope nothing done today, I have a regular jam with some locals on Saturday afternoons and today I was on bass so took the PB-4H and pretended I was one of the Funk Brothers lots of fun but that's the longest I've spent on bass for many years.
I should get the pup route sorted tomorrow and maybe slap a bit of jam on
Finally got the bridge pup route sorted and slapped the CG on the top, doesn't look have bad
Pity it didn't come routed for a standard neck pup, I'd have used a gold surround plate instead of a scratch plate to expose more of the quilt.
looks very nice DK, the CG has really popped the quilt nicely.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yes, that is nice.....
Posting Permissions
Reply With Quote