That’s freaking gold Andy!🤣😂
That’s freaking gold Andy!🤣😂
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Makes me smile... I'll give it another coat of clear and then a polish and it should come up unreal. I did say that I wasn't going to play this one live, but it is such a nice guitar that I might do now, so we'll see if anyone notices... either way I'll look a bit of a sad old man with an 80s pointy guitar!
Just caught up on this thread, great looking guitar. I bet it plays like a dream. I love the deal too, made me laugh.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Looks really good.
I think you would benefit from fitting a string bar on the headstock. It helps the locking nut work a lot better.
This shows how to set one up.
https://hazeguitars.com/blog/locking...bar-adjustment
If the headstock is angled back, then just remove the string clamps and see if the strings are already lying flat across the surface of the nut. If they are lifted off slightly at the tuner side, then fitting a string bar is a good idea. If they are already flat all across the nut, then fitting a bar won't provide any extra benefit.
It certainly helps keep the tuning a bit more stable, means that clamping the strings doesn't affect the tuning allowing you to keep the fine tuners in the middle of their travel, and in some instances, has stopped a string buzzing sound coming from the nut. The clamps then simply are for holding the string in place, and don't have to force the string against the nut as well.