Very nice indeed.
Very nice indeed.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Really nice, I can imagine how.good the quilt looks under the polished finish in real life. Hard to capture in a photo.
Sent from Android Nougat
Current Projects
#Planning 5 String Bass
Looking very good.
You need a diffuse light to take good guitar pictures - no direct lighting. A bright but overcast day is a good start, as this really helps cut down on bright reflections. You need to get creative, go into full photographer mode and come up with lights reflecting off walls and ceilings, or hanging up white sheets all around.
Often better to get further away and use a zoom lens (if you are using a camera rather than a phone). Wide angle-lenses used close-up, do distort the image. A tripod also helps as you can use slower shutter speeds and bigger F-stop (depths of field) settings, or work in lower light levels.
A complimentary colour background can help to highlight the colours in the guitar.
How is the clearance on the A & B tuners as well? They look like they will be very close to the edge as well.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
And we're there!!
Hardware mounted, string it up and plug it in. Very happy with the end result for my very first build.
In Summary:
- PBG PRS-1Q
- PRS shape headstock with quilted maple veneer
- U-Beaut dye, Aussie Oil and Traditional Wax
- Pleeenty of elbow grease
- Upgraded Tuners - Grover Rotomtics
- Tonerider Rocksong P/ups
- Tusq nut
- Upgraded to CTS Pots & orange drop cap
Cheers
Dean
wow that's stunning Axemurderer, how does it sound and play ? If it plays half as good as it looks you are laughing !
Some nice upgrades you did.
DEFINITELY enter it into Feb GOTM !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Oh dear I think I may have just had a gentlemen's moment
Bewdiful
Thanks Wok and Dave.
I've not done the setup yet. I figure I need to let the neck settle under tension before mucking about with relief and action etc. Still it does sound good so far. I had to correct the bridge earthwire connection which has fixed the hum I was getting.