Here's a couple pictures, fixed up the back a bit afterwards so it wasn't such a dominant line and brought in the black a bit more as well but here's the generally idea
http://imgur.com/a/9nnSG
Thanks a lot Simon for all the help!
Here's a couple pictures, fixed up the back a bit afterwards so it wasn't such a dominant line and brought in the black a bit more as well but here's the generally idea
http://imgur.com/a/9nnSG
Thanks a lot Simon for all the help!
Thats is looking really nice Rushburner, I like the edgehugging take on the burst there.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
I like that a lot!
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Looking good Rushburner.
If you brush on the top coat rather than wipe on that should seal the stain and not cause it to become trapped in the liquid finish being applied and consequently cause everything to look the same blended colour. This is what I did with using Tru Oil on the J Bass & Tele in my signatures and also did the same on both Explorers over DT. Spraying is also another option but light brushing could save the hassle of buying more finishing products.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8