Oh, bugger. At least it happened earlier rather than later. What a pain
Oh, bugger. At least it happened earlier rather than later. What a pain
#001 (LP-1S) [finished - co-runner up Nov 2018 GOTM]
#002 (WL-1)
#003 (MPL Megacaster - semi scratch build) [finished]
#004 (ST-1 JR - Arachnoid Superhero build) [finished]
#005 (LP jr)
#006 (TL-1A)
Junk shop acoustic refurbs (various)
'The TGS Special'
.....and in a troubling turn of events, once back in the FrankenLab for over night cogitation......this ....
If nothing else it confirms my suspicion that the board has to come off to rectify the issue.
I just really don't want to have to try it and funk up the work I've done on the board or the inlay.
Sad face/grumpy face/lopsided face (that's Igor)
Sent from my iPhone using Tapatalk
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
I don't think you'll ruin anything. You just need to get the board off and stick it back on again accurately. You can do it.
And tell Igor to take the grin off the back off his head.
So I couldn’t resist a mock build.
There’s still a final polish to do, as well as probably another couple of thin clears on the back of the head stock.
This was my first effort with rattle cans, and it took a great deal of patience and a lot of trial and error. I’m not 100% happy with the state of it. A lot of that is to do with the quality of the work, some of it with the durability of the clears. We shall see how it weathers some abuse,
Sent from my iPad using Tapatalk Pro
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Cheers mate, I’m 50/50on the paint, but I’m pretty happy with how the graphics and inlays turned out. It was a first for me with both.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
That’s slick FrankenWashie! I like the idea of a themed guitar. You’ve put so much good work into this.
Thanks DarkMark, I know a lot more about paint finishes than when I started. Like most of the stuff in the FrankenLab, it’s mostly trial and error....lots and lots of error....Originally Posted by DarkMark
Last edited by FrankenWashie; 25-04-2018 at 08:13 PM. Reason: damn you autocorrect!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Looks great man.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Looks awesome Franky, great work!
Is it a satin clear you used on that? I’ve got an upcoming project that I’m hoping to keep the gloss to a minimum on and it looks like you e achieved the finish I’m after.
Reply With Quote
