What is inside a Vox VTX20 Amp?

[Dedman]

the original speaker was 5 ohms, can't see a prob plugging it into an 8ohm except a little volume loss and I've never had it any where near max volume as it was. The only valve is allegedly on the pre-amp side, although it's probably just there to light up and look all retro LOL

[DrNomis_44]

the original speaker was 5 ohms, can't see a prob plugging it into an 8ohm except a little volume loss and I've never had it any where near max volume as it was. The only valve is allegedly on the pre-amp side, although it's probably just there to light up and look all retro LOL

Yep, I reckon it should work with no major problems, the 8 Ohm Speaker is going to present a lighter load to the amp than that 5 Ohm speaker would, the amp may even run a bit cooler as a consequence, you may not notice much of a drop in volume if the 8 Ohm speaker is an efficient one, you might notice a better overall sound though.

[Dedman]

and so we have a VOX VTX20 head
Sounds great through the bigger cab

[Chuck]

Looks brilliant! What's the wood you used and the finish? And any more shots from other angles (not that I'm a cab rehousing junkie or anything!)?

[DrNomis_44]

That Vox VTX 20 Head looks cool sitting on the speaker cab, have you given it a test run yet?, if so, how does she sound?

[stan]

great work Dedman, look amazing, and that cool Deddy look, nice job man

[Dedman]

to answer Chuck, it's left over ply top, bottom. front and back, and some pine on the sides. All scrap from other projects.