Nah, they all carry tablets or smart phones instead.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Received new tailpiece today from Realparts. Overnight!
Tasks in progress
Cleaning up the binding, then final TO polish coat. I'll then sort out frets/fretboard then prelim assembly less the electronics
Headstock glossed up nicely for decal sticker (still a WIP)
Oh and another bass neck that's getting glossed up with TO. I just love the feel of TO necks
Sent from my iPhone using Tapatalk
Current Projects
#Planning 5 String Bass
good stuff Ponch that is looking very nice with the mini mock build. On the home stretch now mate !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
lookin so fine!
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Nice top Ponch. Is that a veneer or Basswood? Looks pretty flash if it is Basswood.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
It's supposed to be 100% basswood ply (Adam has asked the question of the factory and that was their reply), though I have my doubts. It looks more like a birch layer to me (if it's not maple). It also feels tougher than basswood. It's probably a thicker layer than the standard PBG veneers, but maybe only 1mm thick, so it's still possible to sand through. But being a ply I think the glue used is different to and stronger than the veneer glue, so less danger of it coming loose if you use a water-based stain on it.
@waz - what Simon said. It doesn't look like basswood to me...... and certainly not soft like basswood in any way
Sent from my iPhone using Tapatalk
Current Projects
#Planning 5 String Bass
Frets levelled & dressed, fretboard lemon oiled.
I had to remove quite a bit of material on some frets but nice and level now .
The truss rod worked a treat just a small 1/8th anticlockwise turn to straighten it out
I also rolled the edges of the fretboard with the shaft of a small screwdriver makes it feel nice in my hand
The body colour also looks a lot lighter and less yellow in real light
Sent from my iPhone using Tapatalk
Last edited by andrewdosborne; 24-07-2017 at 07:46 PM.
Current Projects
#Planning 5 String Bass