Greetings fellow builders. I'm building my first bass. I've chosen the rca 4 and I've upgraded to JBE r 4000 pickups. I'm guessing I'll need a different wiring harness due to the new configuration. Anybody have any suggestions?
Greetings fellow builders. I'm building my first bass. I've chosen the rca 4 and I've upgraded to JBE r 4000 pickups. I'm guessing I'll need a different wiring harness due to the new configuration. Anybody have any suggestions?
welcome to the forum Plasti,
where are you from ?
Can you please post some pics or details about the pickups and whether they have 4 wires and are coil splittable ?
If the pickups have a hot and earth wire only then you should be able to use the Pitbull wiring diagram
EDIT are these the pickups ?
http://shop.joebarden.com/p/r4000-style-bass-set
says simple 2 wire installation
Last edited by wokkaboy; 28-04-2016 at 01:05 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Wiring won't be a huge issue, you will have to modify the bridge pickup rout though.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Posting Permissions
Reply With Quote