Nice work Marze, I like where this is going.
Nice work Marze, I like where this is going.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Looking great. A good reward for all your efforts.
Now that's progress! Ready for clear gloss now!
#1- STA1M - Completed Jan16 - GOTM Feb16 - Here
#2- IB5 - Completed Aug16 - Here
#3- 335 style 12 strings - 3rd build - Almost done - Here
No #- SG1 'Franck Zappa' - Completed Apr16 for a friend - No build diary (yet?)
#4- 'The Red Plywood Strat' - Completed Aug16 - Here
#5- ST-1JR Star Wars - Completed Dec16 - Here
#6- SG 3 pickups - Almost done - Here
#7- JBA-4M JPJ Bass - Completed Mar18 - Here
Clear gloss coats are done and I turned my attention to finishing.
First up was the plastic nut had to go and be replaced with a bone nut.
Unfortunately, there was a bit of an accident when loosening the plastic nut with very light tapping ...
Now I am hoping that this is recoverable with some trusty superglue.
Any other suggestions? Would strong wood glue be strong enough?
Sent from my iPhone using Tapatalk
#1 TL-1Q - First build ... aborted
#2 TLA-1 - Blue with Black Burst - Complete
#3 NonPB ES-335 - Red Flamed Maple - in progress
#4 ES-1TL - on order
#5 PRS-1 - on order
oh loud bad words. Unlucky, looks like clean breaks so maybe superglue is the best bet?
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
#1 TL-1Q - First build ... aborted
#2 TLA-1 - Blue with Black Burst - Complete
#3 NonPB ES-335 - Red Flamed Maple - in progress
#4 ES-1TL - on order
#5 PRS-1 - on order
It's a no load area but I would use PVA there rather than super glue
Ouch , titebond will fix it
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
Bummer... I've got some titebond if you need some.
But the blue looks amazing now!
#1- STA1M - Completed Jan16 - GOTM Feb16 - Here
#2- IB5 - Completed Aug16 - Here
#3- 335 style 12 strings - 3rd build - Almost done - Here
No #- SG1 'Franck Zappa' - Completed Apr16 for a friend - No build diary (yet?)
#4- 'The Red Plywood Strat' - Completed Aug16 - Here
#5- ST-1JR Star Wars - Completed Dec16 - Here
#6- SG 3 pickups - Almost done - Here
#7- JBA-4M JPJ Bass - Completed Mar18 - Here