Thanks for your comment Wokkaboy
Hey, everyone again! Decided to put my ES3-B4 into the ring. Came out pretty well, I think. Added Switchcraft parts, CTS pots, and Orange Drop caps. The bridge gave me trouble when I first put it on and split right down the center. Fixed it as well as I could...she plays really nice. By the way, her name is Rose (you know---long lost loves from a long time ago). Good luck to all the entrants. Once again I see some mighty fine guitars. Thanks Pit Bull!
That is a great looking guitar PapaKen!
Whoaahh... I've got soooo bad case of GAS right now....
Damn fine pieces of art this month. Gotta get back on the saddle soon myself....
I missed a couple of entries, well done Fretty the 12 string looks great. Only negative I see is you should have got a blank pickguard (just the pickup holes cut) or got Pabs to cut you one. Have you plugged the hole where the volume usually goes ?
Lipponen the TL-1TB looks very nice, well done
Papaken the ES-4B looks like a cool build too. The standard of all the entries are all very good
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah Woks, the original volume pot hole is plugged. There is no way I could play the guitar with a pot right there.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
no worries Fretty, well the look of the pickguard layout is original I'll give you that. What do the 2 x 3 way switches do in regard to pickup config ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Switch 1 gives LP style Bridge/Bridge + Neck/Neck and switch 2 is Middle/Middle + Switch1/Switch 1, so you get all seven combo's from just the two toggles.
Scott.
cheers Weirdy, no doubt you supplied the wiring diagram to Fretty
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in