I've got a pile of NSW spotted gum that could well be coaxed into action, also plan a chambered Tele from it as well
I've got a pile of NSW spotted gum that could well be coaxed into action, also plan a chambered Tele from it as well
awesome DK, can you please post some pics of the spotted gum ? - only if its handy. You are 7 posts off 4 figures buddy, almost there and half an Overlord !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Would a pic of our upstairs floor doOriginally Posted by wokkaboy
I've got a couple of lengths around the 4m mark and a handful around 1m, sadly no off cuts from the steps because that timber was thick enough to not need lamination but having said that it is very heavy so chambers are essential
More interested in getting 8 wickets to make an association total of 900 or 7 to be the most destructive for my club.
Sadly my team mates choose not to catch well when I have the ball so I think 892 is where it will end, the mind has finally come to grips with the fact I struggle to get over 120 now and nowhere near the 150+ of years gone by.
Just have to drive fast cars and guitars instead
This is looking REALLY nice
Sent from Android Nougat
Current Projects
#Planning 5 String Bass
Hey Bruce I have to thank you mate, you have inspired me to build a similar lap steel but mine will be a baritone scale. I am hoping it will sound like a baritone guitar with heavier strings and a lower tune. Just want to try it out. I have glued the neck through piece together and after some sanding will glue the wings on and route the tuner post cavities. I'll post some pics soon !
Last edited by wokkaboy; 20-01-2017 at 02:31 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
B
Whoops forgot the frets ...
More sanding and laquering ahead....
Bruce
nice one Bruce, what are you using for the fret markers ? some sort of plastic ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Balsa wood ,
Don't laugh ...
It was cheap , the right colour and easy to trim up.
Bruce
ah ok good work Bruce, whatever works !
I won't be using cable ties again until I get a saw wide enough !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Reply With Quote
