Hey, Frankie. Don't forget that soldering irons are hot, so be careful. Hope that helps.
Hey, Frankie. Don't forget that soldering irons are hot, so be careful. Hope that helps.
And I have recently discovered that vintage cloth push back wire is the best to use as you don't need to worry about stripping it back.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
I agree, Waz. I like the solid stuff so you can bend and mould it to shape - especially on guitars where you're wiring on a pickguard so you don't need to move or fit a harness into the body afterwards.
PBG has it in 500mm lengths for $1.50 each whilst Real Parts is $0.90 for 30mm (1 foot) or $17 for 25 Feet = 7.5m therefore PBG still comes out cheaper and in a more useful length.
https://www.pitbullguitars.com/shop/...e-black-500mm/
https://www.pitbullguitars.com/shop/...e-white-500mm/
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
It is finally in one piece! It has strings and it works!
This was originally going to have a set of SD Black Winter in it, but those have been allocated to the Cliche Black LP.
The Entwistles are nice and bright clean, and get very angry when poked with overdrive and distortion.
(I can't do sound demo as I don't have the facility and with my playing y'all should be thankful for that)
There are some tidy ups to do, like black screws for the pup rings, still have to sort a TRC and I may yet strip out the pots for something better. But even with out the locking nut it seems to hold tune better than any other FR equipped axe I've owned/played. Very happy and loud FrankenLab last night!
Sent from my iPhone using Tapatalk
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
The FrankenWashie is alive! Great work you got there in the end
Current Projects
#Planning 5 String Bass
good stuff Frankie glad you got noise out of it. Looks great. So is this 100% scratchy ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in