Solid colour finish

[dingobass]

Had a look at super cheap, and the big blue shed (have not tried the big green one yet) but super cheap did not have a 90 L tank model. Nothing that size under $400.00 ?? But I'll keep looking. They had 95LPM models but 60 L tank was the biggest they had.

First kit st-1 second I hope an LP style.

95LPM / 60 litre would be fine
I tend to go for the overkill with toys..errrm..tools

[Island_Moose]

I've got a 100L v-twin with a 3HP motor, delivering 336l/min, I bought it from a Chinese tool importer for about $500NZD. I put a water separator on it, and it's perfect for spraying. I picked up a second hand professional HVLP touch up gun for another $60NZD. $560 is a lot of money, but air compressors are so useful, I use the dust nozzle all the time during sanding and prep.



Mine is a different colour, but they're all made to order by the same Chinese factory.

My advice? Check our alibaba...order direct:

http://offer.alibaba.com/trade/searc...OQF&moqt=MOQT1

[Crusader]

Thanks Gents, I purchased a touch up gun I will get a compressor shortly.

[Crusader]

OK, so next noob question, what paint and where do you get it?
for the spray gun setup...

Neil

[dingobass]

Guitar Australia stock all your finish needs.
Nello is a cool dude and will be very helpful

[Island_Moose]

I buy acrylic lacquer from an auto-parts store. Dulon (PPG) is made for DIY car painters. The debate between lacquer and enamel rages on internet forums. Car paint is pretty darn durable. You stay with one system from primer to clear coat.

[dingobass]

Just one of many debates...

[Crusader]

I think I will try one each way, One "Rattle Can" as you call them and one with the gun.
Just for experience.

Thank you all for your advice, it has been of help.

[Crusader]

ok, does anyone know where I can find a colour chart for the Rothko and Frost products? I can't even find it on their site?

[dingobass]

https://www.guitaraust.com.au/

Go to finishes, click on Rothco and the chart is there