TL-1 finished in Wudtone Butterscotch. Built by Dingobass.
TL-1 finished in Wudtone Butterscotch. Built by Dingobass.
Cheers,
Adam
adamboyle(at)pitbullguitars.com
Finished in Dark Amber. All stock.
"Music is in the air; it's my job to pull it out."- Jaco Pastorius
TL-1 finished in Empress Black.
Extras:
-Red tortoiseshell pickguard
-Wilkinson PAF pickups
-Chrome pickup surrounds
-Wilkinson bridge
-Wilkinson tuners
-Sprague orange drop tone cap
-Gotoh string retainer
-Schaller strap locks
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
The Yellow Peril
Body finished in Wudtone Goldenrod on the body, extra gloss top coat.
Neck has a light coat of Goldenrod, then extra gloss.
After-market white pearloid 3-ply pick-guard.
Tone-preserving circuit and Orange Drop cap added to circuitry, otherwise stock.
Davocaster.
Reliced Sonic Blue finish.
Extras:
-Wilkinson high output Stratocaster pickups
-Wilkinson compensated brass saddles
-Schaller 5 way selector switch
-Volume and tone knobs removed and replaced with kill switches
-Single ply black pickguard
-Gotoh string retainer
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
TL-1 kit finished in Wudtone Cherry Flamenco
Neck finished in Wudtone Colourless Neck Finish
Pearloid scratchplate
All other parts stock Pitbull Guitars
TL-1 PBG kit "Bladecatcher" DC Esquire
Grover 406 Mini Locking Tuners 18:1
Custom Chrome PUP Ring
Seymour Duncan SH-8b Invader Humbucker
String Through Body Hardware
Custom Neckplate
Custom Esquire pickguard & headstock racing stripe (Courtesy of Pablopepper)
Gibson Nashville TOM bridge
Bournes mini's 500K pots
0.047uF Orange drop Cap
Cloth wiring
CRL 3 way switch
Switchcraft Jack
Recessed round input jack plate
String retaining bar
Black Tusq nut
Plankspanker custom headstock waterslide decals http://www.plankspankerguitardecals.com/
Finished in Behlen Stringed Instrument Nitro Lacquer and Behlen Satin Black Nitro Lacquer/Toner with white pearl binding
This is my first attempt. All went well, I think I got lucky with the timber features.
just finished my Tele all went well except getting my earth and active round the wrong way to start wit.h. I have ended up with one very beautiful guitar
My Tl-1 'Charlie', with a few aftermarket upgrades. Artec filtertron clone in the neck, bigbsy and vibramate for the bridge. 5 way switch. Finished in dingotone uluru red (body) and bloodwood (neck). Finished a while ago but only recently got the headstock decal on!
Sent from my A0001 using Tapatalk
#1 TL-1 (+design creep): Finished! http://www.buildyourownguitar.com.au...ead.php?t=5567
#2 STA-1 - Adding tru-oil onto the body http://www.buildyourownguitar.com.au...ead.php?t=7952
Reply With Quote
