gday, im a bit confused, ive received a EXA kit and to clarify I haven't done anything at all to start, ive test fitted parts and im worried there might be a problem with the size of the neck fitting into the neck pocket it has quite a bit of wiggle room, though the papers inside the box state 'not to worry if there is a bit of wiggle room as this will be needed when attaching the neck', however the amount of wiggle room on this one seems a bit excessive. to clarify it will wiggle left to right a tiny bit creating a gap around the edges of the neck pocket.
I want to attach the neck first thing and then sand it all as one piece so I can smooth out the neck joint area, as in no step, line or gap at all in between the neck wood and body wood.
I know I cant just fill it as I want to use the Dingotone Coolangatta gold on it and obviously don't want to see filler putty or anything on it.
it could be a dumb question this is my first build.
any thought would be appreciated.