Had a warm day during the week and managed to get a couple coats of clear on to seal the neck. Progress shots, still needs more clear and paint the recessed area solid black.
Toying with the idea of glueing the neck in and then spraying the final clear coats, haven't done one that way before, which means need to have a way to hold the bottom of the guitar while it's hanging. Simplest way is to put a small cup hook in the hole for the strap button, just have to drill the hole first. Did that and while the neck was in couldn't resist a mock up.
Think I've mentioned earlier that Pabs made some dress rings for the pups and gave me a few options, brushed look (bridge pup) which I was leaning towards when I thought it would go for a satin finish, or mirror look (neck pup) that seems to go better with the gloss finish it has ended up with.
During this, had a D'oh moment when sitting the bridge pup in place. Made sure the neck pup would fit, may have neglected checking the bridge pup would sit in, should only take a mil or so off each side of the cavity to give clearance.
Just realised have the pups and wire but no pots, caps etc - parts order required.
Grant
Reply With Quote
Originally Posted by neverwas
