other angles, I had no idea double scale really means four times more work on surface area
other angles, I had no idea double scale really means four times more work on surface area
Last edited by wokkaboy; 22-10-2016 at 10:59 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
here's going backwards how it looked against the rack
Last edited by wokkaboy; 22-10-2016 at 11:06 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
The Tele napper will need to bring a trailer
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
cool beast, DB would love to sand that one...
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
Looking at the body compared to the standard neck just messes with your head.
Scott.
I love this project Woks. That neck looks like it's entered the land of the luthier giants!
Sent from my Moto G (4) using Tapatalk
Current Projects
#Planning 5 String Bass
haha cheers guys. Should get time to start shaping the neck this arvo, almost had a disaster routing the neck pocket the height of the router changed and the bearing wasn't low enough and put a couple of small nibs in the pocket edge but all good the neck has plenty of meat will clean up the pocket edges and make the neck heel 3mm wider.
Hoping to get a 6 string bass pickup may be wide enough for the string spacings and get some sound out of it, either the neck or bridge pickup will be live
@ Ponch yeah bit of a worry when you have to buy 2.4m lengths for the neck because 1.2m is too short !
Last edited by wokkaboy; 23-10-2016 at 10:28 AM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hey Woks, this is taking Baritone Scale just a bit far don't you think haha?
Just pulled some 5 string bass PUP's out of the EX-5 that measure 102mm x 40mm and wondered if they'd be big enough or do you need even bigger than that?
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Holey moley Wokks. more work than a double neck!
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
got some more work done today, neck shaped and neck pocket cleaned up, this axe is a tank.
@ Waz cheers for the dimensions but the neck heel is 112mm wide so neck pup would probably need to be at least that sort of dimension. Still a long way to go so will see how the angle of the strings are with a bridge we plan to build
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in