Search:

So how did this turnout? Well the problem was that the neck slot had two thin veneer shims on either side - the glue holding these filed so although the neck was glued it was only secured on the...

Brisbane based - but fast forming the opinion that the neck or body slot has been incorrectly machined. I've put out a call for anyone with the same kit to send me photos of the neck join so I can...

Would really appreciate anyone who has successfully completed the SG 1 Kit posting a picture or two of the neck join and the string height at the 22nd fret. Thanks in advanced. Any tips on...

Thinking if I have to go to this level of effort I should be asking for a refund or replacement neck at the very least.

Cool - would appreciate the comparison (could post some photos?). In the meantime I've set the truss totally anti-clockwise - and will leave it overnight and then re-try clockwise.

Yes - have tried clockwise adjustment of truss - see photos - the neck has slight curve back, the neck join is flush. The only thing I can see that would give the degree of improvement needed would...

The neck is set and was glued flush - I've tried truss adjustment but doesn't seem to have made too much of a difference. Photos uploaded
21824
21825
21826

Hi - JUst completed an SG 1 Kit and am generally happy with it - however the action at the top of the neck (i.e., above the 12th fret ) is too high. I've tried adjusting the neck but that hasn't...

Okay put a small slither of tin foil under the string at the nut and buzzing stopped. What is the more permanent solution? - new nut? (its a new neck :

Cool - thanks for the suggestions.

Just completed a ST A1 kit and mostly happy wit the result. However I've a an open B string buzz that I can't fix. No buzz on any position on the neck - only occurs on when played open and with a...