Nice work! You blokes inspire me to try new things.
Printable View
Thanks cork.
I should point out a couple of handy items that I used.
Attachment 28598
Highly recommended over the equivalent Dremel.
Had this now a couple of years and it's working like it's just out of the box.
Attachment 28599
Not to say everything Dremel is crap.
I got this the other day due to inclusion of the EZ lock system.
Works really well.
cheers, Mark.
A bit more thinking out loud.
Attachment 28600
cheers, Mark.
Last one until my maple veneer arrives.
Attachment 28603
cheers, Mark.
Having read Bass Guy's build thread, (although Grant did something similar) I've stumbled upon another modification.
After looking at a few Jazzmaster jpegs, I'm going to carve away some of the lower bout which is a tad exaggerated in the JM-1.
I'm mainly concerned about getting it to sit better in a guitar stand.
Attachment 28613
cheers, Mark.
That makes sense as offsets tend to be a bit bottom heavy.
Sent from my SM-A520F using Tapatalk
Out with the hand saw...
Attachment 28616
Attachment 28617
Attachment 28618
Progress shot.
Attachment 28619
cheers, Mark.
Looks so much better now.
Sent from my SM-A520F using Tapatalk