Telecaster replacement pickup wiring question
Good morning all! It's been a while since I've been here. Fatherhood, work and lack of pocket money have all been contributing factors ;)
I've recently decided and committed to modding my '83 MIJ Telecaster, and committed to buying (awaiting delivery) of a handmade "Martin A Smith" wide range humbucker (https://www.martinasmith.com.au/coll...mbucker-single) from downtown Perth, WA for the neck.
After I pulled the trigger and paid for it, I had an afterthought about the wiring and pots...
Martin will supply me with a 1meg pot to compliment the new pickup, but then I thought about the stock bridge PUP? I assume the pots in the Tele are 250k, and from what I've read the bridge is going to be UNBELIEVABLY bright if going though a 1meg pot.
Now I am the first to admit I know next to zero about electronics. Can someone offer me any advice? The only possible solution I came up with was buying a control panel with three knobs, and hopefully find a wiring diagram online, but so far I've come up with nothing.
Just to complicate things a little more, I want to be able to split the new WRHB too. I have the original control plate for the tele which has a switch on it (was for phasing before I disconnected it), which I thought I could utilise.